Torsion spring devices help to lift the weight of the door so that it can open either manually or electrically. On the garage door, it is part of an apparatus that has a shaft, which lift drums that are connected to cables. The apparatus is mounted at the top of the door, while the cables are attached at the bottom. Typical torsion springs can handle thousands of cycles before being too worn out to work, often going a few years. The number of cycles depends on the number of doors the garage has and the typical number of times one opens it daily. Generally, most people tend to open automatic doors more frequently. It might be several years before one needs to replace their torsion springs.
Identifying the right replacement spring
It is important for any garage owner to understand the fundamentals of the garage door torsion spring. Anyone looking to make a replacement of their garage door torsion spring in Orlando must understand how to choose the right one. The first step is to look at the end of the spring and determine the direction in which it winds. Clockwise pointing springs are let wound, while right wound springs point in the opposite direction. After that, take measurements of the length of ten or twenty coils and the inside diameter. These should preferably be compared to a chart to determine the right choice.
The springs come in different standard sizes so one has to take measurements of the old springs to make sure they know exactly what to look for in the new springs. The winding of the springs adds a lot of length overall, so one should take the measurements of the spring in a relaxed state. If unsure about the spring specifications from the indicated figures, one often has to go through a process to unwind them to a fully relaxed state.
Any company dealing in garage door torsion springs in Orlando will advise the user to look at the end treatments. The most common end treatment is the standard torsion end. This mainly consists of a short and straight length of wire that protrudes at the end. However, different manufacturers, in a bid to ensure continual purchase of replacement torsion springs from them, will often have non-standard torsion spring ends. Going for a reputable Garage door torsion springs Orlando Company will help when choosing the right replacement parts for the garage door.
Causes of springs breaking
Many people do not take their garage doors as seriously as they should, often ignoring the warning signs. While they are made to withstand a fair amount of wear and tear, specific factors can contribute to the rapid wear and tear of torsions springs. They often come with guarantees of between three to seven years, but the following factors can contribute to a faster rate of breaking.
• Poor or lack of regular garage door maintenance.
• Buildup of grease on garage door tracks resulting in wheels skating rather than turning in the bearings.
• Insufficient lubrication of the hinges, bearings and spring wire.